Users Guide

show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {interface interface | stack—unit slot-number port-set number
[pipeline number]} [summary]
Parameters
interface
interface
Enter the keyword interface then the name of the interface.
stack–unit
number
Enter the keyword stack-unit then the slot number.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Command
History
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The show cam pbr command displays the PBR CAM content.
Example
Dell# show cam pbr stack-unit 1 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST,
Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress
Index Flag Port Port MAC Port
----------------------------------------------------------------------------------------------
00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24 00:01:e8:8a:fd:76 0/0
00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32 00:01:e8:8a:fd:76 Vl 100(0/1)
00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0 00:01:e8:8a:fd:76 Vl 1020(Po 100)
Dell#
Related
Commands
● ip redirect-group – applies a redirect group to an interface.
● show ip redirect-list – displays the redirect-list configuration.
show ip redirect-list
View the redirect list configuration and the interfaces it is applied to.
Syntax
show ip redirect-list redirect-list-name
Parameters
redirect-list-
name
Enter the name of a configured Redirect list.
Command Modes
● EXEC
● EXEC Privilege
1030 Policy-based Routing (PBR)