Users Guide

Displaying the Status of Stacking Ports
To display the status of the stacking ports, including the topology, use the following command.
• Display the stacking ports.
EXEC Privilege mode
show system stack-ports
Examples of Viewing the Status for Stacked Switches
Dell#show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
---------------------------------------------------------
1/29 2/29 10 up up
1/30 3/29 10 up up
2/29 1/29 10 up up
2/30 4/54 10 up up
3/29 1/30 10 up up
3/30 7/29 10 up up
4/53 5/54 10 up up
4/54 2/30 10 up up
5/53 12/54 10 up up
5/54 4/53 10 up up
6/53 11/30 10 up up
6/54 12/53 10 up up
7/29 3/30 10 up up
7/30 8/29 10 up up
8/29 7/30 10 up up
8/30 9/29 10 up up
9/29 8/30 10 up up
9/30 10/54 10 up up
10/53 11/29 10 up up
10/54 9/30 10 up up
11/29 10/53 10 up up
11/30 6/53 10 up up
12/53 6/54 10 up up
12/54 5/53 10 up up
Dell#
The following example shows the parameters for the management unit in the stack.
Dell#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S3124P - 28-port GE/TE (S3100)
Current Type : S3124P - 28-port GE/TE (S3100)
Master priority : 14
Hardware Rev : 5.0
Num Ports : 30
Up Time : 2 hr, 56 min
Dell Networking OS Version : 1-0(0-4697)
Jumbo Capable : yes
POE Capable : yes
FIPS Mode : disabled
Boot Flash : 5.2.1.3
Boot Selector : Present
Memory Size : 1073741824 bytes
Temperature : 39C
Voltage : ok
Serial Number :
Stacking
829