Administrator Guide

Example
DellEMC# show fefd
FEFD is globally 'ON', interval is 10 seconds, mode is 'Aggressive'.
INTERFACE MODE INTERVAL STATE
(second)
Gi 5/1 Aggressive 10 Admin Shutdown
Gi 5/2 Aggressive 10 Admin Shutdown
Gi 5/3 Aggressive 10 Admin Shutdown
Gi 5/4 Aggressive 10 Admin Shutdown
Gi 5/5 Aggressive 10 Admin Shutdown
Gi 5/6 Aggressive 10 Admin Shutdown
Gi 5/7 Aggressive 10 Admin Shutdown
Gi 5/8 Aggressive 10 Admin Shutdown
Gi 5/9 Aggressive 10 Admin Shutdown
Gi 5/10 NA NA Locally disabled
Gi 5/11 Aggressive 10 Err-disabled
DellEMC#
Related
Commands
• fefd — enable far-end failure detection.
• fefd disable — disable FEFD on an interface only.
• fefd-global — enable FEFD globally on the system.
• fefd reset — reset all interfaces or a single interface that was in “error-disabled” mode.
Layer 2 887