Administrator Guide

Version Description
9.1.(0.0) Updated to support OpenFlow.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Augmented to display PVLAN data for the C-Series and S-Series and revised the output
to include the Description field to display a user-entered VLAN description.
7.6.1.0 Introduced on the S-Series and revised the output to display Native VLAN.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information The following describes the show vlan command shown in the following example.
Column
Heading
Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
• O = OpenFlow
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for active VLANs.
Q
• Displays G for GVRP tagged
• M for member of a VLAN-Stack VLAN
• T for tagged interface
• U for untagged interface
• x (not capitalized x) for Dot1x untagged
• X (capitalized X) for Dot1x tagged
• o (not capitalized o) for OpenFlow untagged
• O (capitalized O) for OpenFlow tagged
• H for VSN tagged
• i (not capitalized i) for Internal untagged
• I (capitalized I) for Internal tagged
• v (not capitalized v) for VLT untagged
• V (capitalized V) for VLT tagged
Ports Displays the type, slot, and port information.
• Po = port channel
• Gi = gigabit Ethernet
• Te = ten-gigabit Ethernet
Example
DellEMC# show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I -
Isolated
Q: U - Untagged, T - Tagged, O - Openflow
x - Dot1x untagged, X - Dot1x tagged
o - OpenFlow untagged, O - OpenFlow tagged
G - GVRP tagged, M - Vlan-stack
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT
tagged
NUM Status Description Q Ports
874 Layer 2