Administrator Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Example
DellEMC(conf)# interface range gigabitethernet 1/1 - 1/2
DellEMC(conf-if-range-gi-1/1-2)# show config
!
interface GigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface GigabitEthernet 1/2
no ip address
switchport
no shutdown
DellEMC(conf-if-range-gi-1/1-1/2)#
show hardware
Display the hardware counters on a specified interface or on a specified stack unit.
Syntax
show hardware {counters interface interface—type slot/port | stack-unit stack-
unit-number unit unit-number counters}
Parameters
counters Enter the keyword counters to display the counters on a specified interface.
interface Enter the keyword interface followed by the interface information and the slot/port
number.
stack-unit Enter the keyword stack-unit followed by a stack unit-number to display the counters
on a specified stack unit.
unit Enter the keyword unit followed by a unit-number.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the S3048–ON.
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage Information
Use the show hardware counters interface interface—type slot/port to view the hardware
counters on the specified interface.
Interfaces 625