Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.1(0.0) Introduced on S4810 and Z9000.
8.3.19.0 Introduced on S4820T.
Usage Information Include the colon (:) when entering this command. This command checks the specified flash memory for errors. If
errors are found, the command recommends that you format the flash.
CAUTION: If you elect to format the flash, all files – including the startup configuration file – are
lost. If you do decide to format the specified flash, consider saving the running configuration as
the startup configuration after formatting the flash (use the write memory command or copy
running-config startup-config command).
Related
Commands
• copy — copy one file to another location.
• show file-systems — display information about the file systems on the system.
mkdir
Creates a directory on the NFS mounted file system.
Syntax
mkdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Example
DellEMC# mkdir nfsmount:/nfs-mountpoint/guest
DellEMC#
Related
Commands
• rmdir — remove a directory.
62 File Management