Administrator Guide

service-pool detail Enter the keyword service-pool followed by the keyword detail to view detailed
information about the service pool usage.
interface interface
Enter any of the following keywords and the interface information:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
queue
Enter the keyword queue followed by all for displaying details of all queues, ucast
queue-id or all for displaying Unicast queue details, and mcast queue-id or all for
displaying Multicast queue details.
priority-group Enter the keyword priority-group followed by id for specific priority-group or
keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/multicast buffer usage on
per-port per-queue basis. For CPU port, counters for queues 0 to 11 displays and there is no differentiation
between unicast and multicast queues.
show hardware stack-unit buffer-stats-snapshot (Total
Buffer Information)
View the buffer statistics tracking resource information depending on the type of buffer information, such as device-level details, port-
level counters, queue-based snapshots, or priority group-level snapshot in the egress and ingress direction of traffic.
Syntax
show hardware stack-unit <id> buffer-stats-snapshot unit <id> resource x
Parameters
stack-unit stack-
unit-number
Unique ID of the stack unit to select a particular stack member and then enter one of the
following command options to display a collection of data based on the option entered.
buffer-stats-
snapshot unit
number
Display the historical snapshot of buffer statistical values unit Enter the keyword unit
along with a port-pipe number. The range is from 0 to 0.
buffer-info Buffer and traffic manager resources usage, where X can be one of the following:
• All - Displays ingress and egress device, port, and queue snapshots
• Interface all queue {all} - egress queue-level snapshot for both unicast and multicast
packets
482 Debugging and Diagnostics