Administrator Guide

The show ip bgp command displays the dmzlink-dw details only if dmzlink-bw is enabled using the bgp
dmzlink-dw command.
Example
DellEMC# show ip bgp
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 55.0.0.0/24 172.16.0.2 0 200 i
*> 66.0.0.0/24 172.16.0.2 0 200 i
All the show and debugs commands display the link band width extended-community prefixed with DMZ-Link-
bw along with other extended communities.
DellEMC# show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Following is the example for displaying all the received routes from all IPv4 neighbors:
DellEMC# show ip bgp vrf test ipv4 unicast neighbors all received-routes
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 1.1.1.1
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
ID 110.1.1.0/24 11.1.1.2 0 100 0 ?
*>I 111.1.1.0/24 11.1.1.2 0 100 0 ?
ID 112.1.1.0/24 11.1.1.2 0 100 0 ?
*>I 113.1.1.0/24 11.1.1.2 0 100 0 ?
ID 114.1.1.0/24 11.1.1.2 0 100 0 ?
*>I 115.1.1.0/24 11.1.1.2 0 100 0 ?
ID 116.1.1.0/24 11.1.1.2 0 100 0 ?
ID 117.1.1.0/24 11.1.1.2 0 100 0 ?
ID 118.1.1.0/24 11.1.1.2 0 100 0 ?
ID 119.1.1.0/24 11.1.1.2 0 100 0 ?
ID 120.1.1.0/24 11.1.1.2 0 100 0 ?
Following is the example for displaying all the received routes from all IPv6 neighbors:
DellEMC# show ip bgp ipv6 unicast neighbors all received-routes
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 11.1.1.1
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r -
redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
404
Border Gateway Protocol