Administrator Guide

Related
Commands
• support-assist — moves to the SupportAssist Configuration mode.
support-assist
Move to the SupportAssist configuration mode.
Syntax
support-assist
To remove all the configuration of the SupportAssist service, use the no support-assist command.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information If you reject the EULA, the data is not transmitted to the SupportAssist server.
Related
Commands
• eula-consent — accept or reject the EULA.
support-assist activate
Launch the configuration wizard that enables SupportAssist service and guides through a series of commands to configure SupportAssist.
Syntax
support-assist activate
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
You are guided through a series of queries to configure SupportAssist. The generated commands are added to the
running configuration, including the DNS resolve commands, if configured.
This command starts the configuration wizard for the SupportAssist. At any time, you can exit by entering Ctrl-C.
If necessary, you can skip some data entry.
Once you exit the wizard, the Dell EMC Networking OS starts a full transfer.
SupportAssist 1517