Administrator Guide

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-
authentication my-authorized-keys device://filename command).
ip ssh server
Syntax
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell EMC Networking representative.
ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-
exchange-algorithm] [mac hmac-algorithm][version 2]
To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable |
port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] command.
Parameters
enable Enter the key word enable to start the SSH server.
ciphers cipher-list Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH
server supports. The following ciphers are available.
• 3des-cbc
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
The default cipher list is used.
• 3des-cbc
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
mac hmac-
algorithm
Enter the keyword mac then a space-delimited list of hash message authentication code
(HMAC) algorithms supported by the SSH server for keying hashing for the message
authentication.
The following HMAC algorithms are available:
•
hmac-sha1
1376 Security