Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1041

Parameters

process-id

Enter the OSPF Process ID to show a specific process. If no Process ID is entered,

command applies only to the first OSPF process.

vrf

vrf-name

Enter the keyword vrf followed by the name of the VRF to view information on AS

external LSAs corresponding to the OSPF processes that are tied to a specific VRF.

link-state-id

(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the

LSA type, and it can be one of the following:

• the network’s IP address for Type 3 LSAs or Type 5 LSAs

• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs

• the default destination (0.0.0.0) for Type 5 LSAs

adv-router

ip-

address

(OPTIONAL) Enter the keywords adv-router and the ip-address to display only the

LSA information about that router.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Added support for VRF.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.1.1.1 Introduced on the E-Series.

Usage Information The following describes the show ip ospf process-id database external command shown in the

following example.

Field Description

LS Age Displays the LSA’s age.

Options Displays the optional capabilities available on router. The following options can be found in

this item:

• TOS-capability or No TOS-capability is displayed depending on whether the router can

support Type of Service.

1050 Open Shortest Path First (OSPFv2 and OSPFv3)