Users Guide
Sample Configuration
You can use the following example configuration to set up a PBR. These are not comprehensive directions but are intended to
give you a guidance with typical configurations. You can copy and paste from these examples to your CLI. Make the necessary
changes to support your own IP addresses, interfaces, names, and so on.
The Redirect-List GOLD defined in this example creates the following rules:
• description Route Gold traffic to the DS3
• seq 5 redirect 10.99.99.254 ip 192.168.1.0/24 any “ Redirect to next-hop router IP 10.99.99.254 any traffic originating in
192.168.1.0/24”
• seq 10 redirect 10.99.99.254 ip 192.168.2.0/24 any “ Redirect to next-hop router IP 10.99.99.254 any traffic originating in
192.168.2.0/24”
• seq 15 permit ip any
Create the Redirect-List GOLD
Assign Redirect-List GOLD to Interface 2/11
View Redirect-List GOLD
Creating a PBR list using Explicit Track Objects for Redirect IPs
Policy-based Routing (PBR) 566