Users Guide

TX - Packet/Frame Counter 0
TX - Unicast Frame Counter 0
TX - Multicast Frame Counter 0
TX - Broadcast Frame Counter 0
TX - Byte Counter 0
TX - Control Frame Counter 0
TX - Pause Control Frame Counter 0
TX - Oversized Frame Counter 0
TX - Jabber Counter 0
TX - VLAN Tag Frame Counter 0
TX - Double VLAN Tag Frame Counter 0
TX - RUNT Frame Counter 0
TX - Fragment Counter 0
TX - PFC Frame Priority 0 0
TX - PFC Frame Priority 1 0
TX - PFC Frame Priority 2 0
TX - PFC Frame Priority 3 0
TX - PFC Frame Priority 4 0
TX - PFC Frame Priority 5 0
TX - PFC Frame Priority 6 0
TX - PFC Frame Priority 7 0
TX - Debug Counter 0 0
TX - Debug Counter 1 0
TX - Debug Counter 2 0
TX - Debug Counter 3 0
TX - Debug Counter 4 0
TX - Debug Counter 5 0
TX - Debug Counter 6 0
TX - Debug Counter 7 0
TX - Debug Counter 8 0
TX - Debug Counter 9 0
TX - Debug Counter 10 0
TX - Debug Counter 11 0
TX - EEE LPI Event Counter 0
TX - EEE LPI Duration Counter 0
<<Output Truncated>>
Clear EEE Counters
To clear the EEE counters, use the following the commands.
• Clear the EEE counters on all the copper ports.
EXEC Privilege mode
clear counters eee
• Clear the EEE counters on the specified port.
EXEC Privilege mode
clear counters interface-type slot/port eee
• Clear the EEE counters on the specified range of ports.
EXEC Privilege mode
clear counters interface-type slot/port-range eee
Examples of the clear counters eee Command
When you use this command, confirm that you want Dell Networking OS to clear the EEE counters.
Dell# clear counters eee
Clear eee counters on all Copper Ports [confirm] y
Dell#
Dell# clear counters gigabitethernet 1/1 eee
Clear eee counters on Gi 1/1 [confirm] y
Dell#
Interfaces 312