Administrator Guide

Current sessions for user admin:
Line Location
2 vty 0 10.14.1.97
3 vty 1 10.14.1.97
4 vty 2 10.14.1.97
5 vty 3 10.14.1.97
Kill existing session? [line number/Enter to cancel]:
Enabling Secured CLI Mode
The secured CLI mode prevents the users from enhancing the permissions or promoting the privilege levels.
● Enter the following command to enable the secured CLI mode:
CONFIGURATION Mode
secure-cli enable
After entering the command, save the running-configuration. Once you save the running-configuration, the secured CLI mode is
enabled.
If you do not want to enter the secured mode, do not save the running-configuration. Once saved, to disable the secured CLI
mode, you need to manually edit the startup-configuration file and reboot the system.
Log Messages in the Internal Buffer
All error messages, except those beginning with %BOOTUP (Message), are log in the internal buffer.
For example, %BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Configuration Task List for System Log Management
There are two configuration tasks for system log management:
● Disable System Logging
● Send System Messages to a Syslog Server
Disabling System Logging
By default, logging is enabled and log messages are sent to the logging buffer, all terminal lines, the console, and the syslog
servers.
To disable system logging, use the following commands.
● Disable all logging except on the console.
CONFIGURATION mode
no logging on
● Disable logging to the logging buffer.
CONFIGURATION mode
no logging buffer
● Disable logging to terminal lines.
CONFIGURATION mode
no logging monitor
● Disable console logging.
CONFIGURATION mode
no logging console
68
Management