Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

951

952

953

954

955

956

957

958

959

960

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added the list option and removed the prefix-list option.

7.4.1.0 Introduced

Usage

Information

If a list is not specified, all SA messages received from the default peer are accepted. You can enter

multiple default peer commands.

ip msdp log-adjacency-changes

Enable logging of MSDP adjacency changes.

Syntax

ip msdp log-adjacency-changes

To disable logging, use the no ip msdp log-adjacency-changes command.

Defaults Not configured.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.