Administrator Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
DellEMC#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
4286574592 4170424320 FAT32 USERFLASH rw flash:
- - unformatted USERFLASH rw fcmfs:
2032525312 590807040 Unknown NFSMOUNT rw nfsmount:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
- - - network rw http:
DellEMC#
Command Fields
Field Description
size(b) Lists the size (in bytes) of the storage location. If the location is remote, no size is
listed.
Free(b) Lists the available size (in bytes) of the storage location. If the location is remote,
no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word network is listed.
Flags Displays the access available to the storage location. The following letters indicate
the level of access:
● r = read access
● w = write access
Prefixes Displays the name of the storage location.
show os-version
Display the release and software image version information of the image file specified.
Syntax
show os-version [file-url]
Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal flash, enter flash:// followed by the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the USB port, enter usbflash://filepath.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
File Management 73