Administrator Guide

Power-cycling the unit(s).
DellEMC#
Example (single
stack)
DellEMC# restore factory-defaults stack-unit 1 clear-all
**************************************************************
* Warning - Restoring factory defaults will delete the existing *
* startup-config and all persistent settings (stacking, fanout, etc.)*
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success Success
Power-cycling the unit(s).
DellEMC#
Example (NvRAM
all stack units)
DellEMC# restore factory-defaults stack-unit all nvram
**************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* All the units in the stack will be split into standalone units. *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success
2 Success
3 Success
4 Not present
5 Not present
Power-cycling the unit(s).
DellEMC#
Example
(NvRAM, single
unit)
DellEMC# restore factory-defaults stack-unit 1 nvram
**************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
**************************************************************
Proceed with factory settings? Confirm [yes/no]:yes
-- Restore status --
Unit Nvram Config
------------------------
1 Success
Power-cycling the unit(s).
DellEMC#
show boot system
Displays information about boot images currently configured on the system.
Syntax
show boot system stack-unit{stack-unit—id | all}
Parameters
all Enter the keyword all to display the boot image information for all stack units.
stack-unit-id Enter the stack-unit-id to display boot image information for a stack-unit.
Defaults none
70 File Management