Administrator Guide
○ hardware forwarding-table mode {scaled-l2-switch | scaled-l3-routes
| scaled-l3-hosts}
○ cam-ipv6 extended-prefix {1024 | 2048 | 3072}
○ ip ecmp-group maximum-paths 2-64
● ACL CAM carving related CLIs:
○ cam-acl cli
○ cam-acl-vlan cli
○ cam-acl-egress cli
○ cam-sharing
● Feature keyword CLIs:
○ feature udf-acl
○ feature aclrange
○ feature ipv6acloptimized
○ feature acloptimized
Example
DellEMC# upgrade system tftp://10.11.8.12/dv-rainier-13 a:
00:39:32 : Discarded 1 pkts. Expected block num : 51.
Received block num: 50
!00:39:36 : Discarded 1 pkts. Expected block num : 65.
Received block num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.......
...........!!!!!!!!!!!!!!!!!!!!!!!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Image upgraded to all
DellEMC#
The following example shows that the system prompts for the hash value of the OS image with the OS
image verification feature enabled:
Dell# upgrade system tftp://10.16.127.35/FTOS-SE-9.11.0.1 A:
Hash Value: e42e2548783c2d5db239ea2fa9de4232
!!!!!!!!!!!!!!...
rename
Rename a file in the local file system.
Syntax
rename url url
Parameters
url
Enter the following keywords and a filename:
● For a file on the internal Flash, enter flash:// followed by the filename.
● For a file on an NFS mounted file system, enter nfsmount:// followed by the
mount point and file path.
● For a file on an external USB drive, enter usbflash:// followed by the
filename.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
File Management 67