Administrator Guide

Gi 1/22 Yes Yes 0 0
0 0
Gi 1/23 Yes Yes 0 0
0 0
Gi 1/24 Yes Yes 0 0
0 0
Te 1/25 N/A - - -
- -
Te 1/26 N/A - - -
- -
Te 1/27 No No 0 0
0 0
Te 1/28 No No 0 0
0 0
<<Output Truncated>>
Example for a specific interface
S3100 Series
DellEMC#show interfaces gigabitethernet 1/1 eee statistics
Port EEE LPI TxLPIEventCount TxLPIDuration
RxLPIEventCount RxLPIDuration
Gi 1/1 Yes Yes 0 0
0 0
Related
Commands
● show interfaces — display information on a specific physical interface or virtual interface.
show interfaces phy
Display auto-negotiation and link partner information.
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
gigabitethernet Enter the keyword gigabitethernet then the slot/port information.
tengigabitethern
et
Enter the keyword tengigabitethernet then the slot or port information.
NOTE: This command also enables you to view information corresponding to a
range of ports. However, for Open Networking (ON) platforms the notation for
specifying port range in the command is different from how you specify in non-
ON platforms.
● For non-ON platforms, you can specify multiple ports as slot/port-range.
For example, if you want to display information corresponding to all ports
between 1 and 4, specify the port range as show interfaces interface-
type 1/1 - 4.
● For ON platforms, you can specify multiple ports as slot/port/[subport]
- slot/port/[subport]. For example, if you want to display information
corresponding to all ports between 1 and 4, specify the port range as show
interfaces interface-type 1/1/1 - 1/1/4.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
660 Interfaces