Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

usbflash:

For a directory on the external USB flash, enter usbflash:// directory name.

Defaults None

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.1(0.0) Introduced on S4810 and Z9000.

8.3.19.0 Introduced on S4820T.

Usage

Information

Include the colon (:) when entering this command. This command checks the specified flash memory for

errors. If errors are found, the command recommends that you format the flash.

CAUTION: If you elect to format the flash, all files – including the startup configuration file

– are lost. If you do decide to format the specified flash, consider saving the running

configuration as the startup configuration after formatting the flash (use the write

memory command or copy running-config startup-config command).

Commands

● copy — copy one file to another location.

● show file-systems — display information about the file systems on the system.

mkdir

Creates a directory on the NFS mounted file system.

Syntax

mkdir nfsmount://mount-point/usrname

Command Modes CONFIGURATION