Administrator Guide

Example
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES SHARED CELLS HEADROOM CELLS
--------------------------------------------------
7 0-2,5 0 0
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES SHARED CELLS HEADROOM CELLS
--------------------------------------------------
0 - 0 0
1 - 0 0
2 - 0 0
3 7 0 0
4 6 0 0
5 4 0 0
6 3 0 0
7 0-2,5 0 0
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow stack-unit id port-set number [counters]
Parameters
stack-unit id Enter the keywords stack-unit to select a stack member ID.
port-set number
[counters]
Enter the keywords port-set with a port-pipe number.
(OPTIONAL) Enter the keyword counters for the specified port-pipe.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
498 Debugging and Diagnostics