Administrator Guide

ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to
view information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
ip-address (OPTIONAL) Enter the IP address (in dotted decimal format) of the BGP network
to view information only on that network.
mask (OPTIONAL) Enter the network mask (in slash prefix (/x) format) of the BGP
network address.
filter-list as-
path-name
(OPTIONAL) Enter the keyword filter-list then the name of a configured AS-
PATH ACL. The range is 140 characters.
regexp regular-
expression
Enter a regular expression then use one or a combination of the following
characters to match. The range is 256 characters.
● . = (period) any single character (including a white space).
● * = (asterisk) the sequences in a pattern (zero or more sequences).
● + = (plus) the sequences in a pattern (one or more sequences).
● ? = (question mark) sequences in a pattern (either zero or one sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
● [ ] = (brackets) a range of single-character patterns.
● ( ) = (parenthesis) groups a series of pattern elements to a single element.
● { } = (braces) minimum and the maximum match count.
● ^ = (caret) the beginning of the input string. If you use the caret at the
beginning of a sequence or range, it matches on everything BUT the characters
specified.
● $ = (dollar sign) the end of the output string.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Border Gateway Protocol 429