Administrator Guide

Usage
Information
You can use this command to disable all the configured BGP neighbors corresponding to the multicast
IPv4 address families.
This command is global for all VRFs.
shutdown address-family-ipv4–unicast
Disables all the BGP neighbors corresponding to the unicast IPv4 address families.
Syntax
shutdown address-family-ipv4–unicast
Use the no shutdown address-family-ipv4–unicast command to enable all the configured
BGP neighbors corresponding to the unicast IPv4 address families.
Command Modes
ROUTER BGP
CONFIGURATION
Command
History
Version Description
9.11.0.0 Introduced on the S-Series, Z-Series, MXL, and IOM.
Usage
Information
You can use this command to disable all the configured BGP neighbors corresponding to the unicast IPv4
address families.
This command is global for all VRFs.
shutdown address-family-ipv6–unicast
Disables all the BGP neighbors corresponding to the unicast IPv6 address families.
Syntax
shutdown address-family-ipv6–unicast
Use the no shutdown address-family-ipv6–unicast command to enable all the configured
BGP neighbors corresponding to the unicast IPv6 address families.
Command Modes
ROUTER BGP
CONFIGURATION
Command
History
Version Description
9.11.0.0 Introduced on the S-Series, Z-Series, MXL, and IOM.
Usage
Information
You can use this command to disable all the configured BGP neighbors corresponding to the unicast IPv6
address families.
This command is global for all VRFs.
set extcommunity bandwidth
Enables you to set extended community bandwidth.
Syntax
set extcommunity bandwidth
To disable extended community bandwidth, enter the no set extcommunity bandwidth command.
Parameters
bandwidth Enter the keyword bandwidth to enable extended community bandwidth. The
range is from 0 to 102400.
Defaults N/A
Command Modes ROUTER MAP
Border Gateway Protocol 411