Administrator Guide

Version Description
9.10(0.0) Introduced the all keyword on the S4810, S4820, S4048–ON, S3048–ON, S3100
series, S6010–ON, S4040T-ON, S5000, S6000, S6000–ON, S6100–ON, Z9100–
ON, and Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
If you configure the set next-hop command in ROUTE-MAP mode, the configuration takes
precedence over the neighbor next-hop-self command.
If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route
reflector. If you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated
by the route reflector.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
Syntax
neighbor {ip-address | peer-group-name} password [encryption-type] password
To delete a password, use the no neighbor {ip-address | peer-group-name} password
command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means
that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character of the password
must be a letter.
You cannot use spaces in the password.
Defaults Not configured.
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
Border Gateway Protocol 389