Administrator Guide

To return to the default, use the no bgp graceful-restart command.
Parameters
restart-time
seconds
Enter the keyword restart-time then the maximum number of seconds to
restart and bring-up all the peers. The range is from 1 to 3600 seconds. The default
is 120 seconds.
stale-path-time
seconds
Enter the keyword stale-path-time then the maximum number of seconds to
wait before restarting a peer’s stale paths. The default is 360 seconds.
role receiver-only Enter the keyword role receiver-only to designate the local router to
support graceful restart as a receiver only.
Defaults as above
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In Receiver Only mode,
BGP saves the advertised routes of peers that support this capability when they restart.
BGP graceful restart is active only when the neighbor becomes established. Otherwise it is disabled.
Graceful-restart applies to all neighbors with established adjacency.
This command automatically restarts the BGP instance for the configuration to take effect.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do not have their MEDs
compared).
Command Modes ROUTER BGP
Border Gateway Protocol 357