Administrator Guide

Actual parameters:
TX: 300ms, RX: 250ms, Multiplier: 3
Role: Active
Delete session on Down: False
Client Registered: CLI
Uptime: 00:02:04
Statistics:
Number of packets received from neighbor: 376
Number of packets sent to neighbor: 314
Number of state changes: 2
Number of messages from IFA about port state change: 0
Number of messages communicated b/w Manager and Agent: 6
DellEMC#
Related
Commands
● bfd all-neighbors — establish BFD sessions with all neighbors discovered by the IS-IS protocol or
OSPF protocol out of all interfaces.
vrrp bfd neighbor
Establish a BFD for VRRP session with a neighbor.
Syntax
vrrp bfd neighbor ip-address
To remove the BFD session with the neighbor, use the no vrrp bfd neighbor ip-address
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format (A.B.C.D).
Defaults None
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series.
7.5.1.0 Added support for VLAN and port-channel interfaces on the E-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
● show bfd neighbors — display the BFD neighbor information on all interfaces or a specified interface.
338 Bidirectional Forwarding Detection (BFD)