Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

191

192

193

194

195

196

197

198

199

200

no-drop Enter the keywords no-drop to match only the forwarded packets.

Defaults Not configured.

Command Modes CONFIGURATION-STANDARD-ACCESS-LIST

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.12(0.0) Removed the session–ID option from the monitor parameter.

9.11(0.0) Added support for session–ID to the monitor parameter.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Added the no-drop parameter.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.3.1.0 Add the DSCP value for ACL matching.

8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

7.4.1.0 Added support for the non-contiguous mask and added the monitor option.

6.5.1.0 Expanded to include the optional QoS order priority for the ACL entry.

Usage

Information

The order option is relevant in the context of the Policy QoS feature only. For more information, see the

Quality of Service section in the Dell EMC Networking OS Configuration Guide.

The software cannot count both packets and bytes; when you enter the count byte options, only bytes

increment.

Commands

● ip access-list standard — configure a standard ACL.

● permit — configure a permit filter.

ip access-list standard

Create a standard IP access list (IP ACL) to filter based on IP address.

Syntax

ip access-list standard access-list-name

To delete an access list, use the no ip access-list standard access-list-name command.

192 Access Control Lists (ACL)