Administrator Guide

Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information
The following describes the show system stack-ports command shown in the following example.
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone.
Interface The unit/port ID of the connected stack port on this unit.
Link Speed Link Speed of the stack port (10 or 40) in Gb/s.
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is connected.
Example
DellEMC#show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
---------------------------------------------------------
1/29 2/29 10 up up
1/30 3/29 10 up up
2/29 1/29 10 up up
2/30 4/54 10 up up
3/29 1/30 10 up up
3/30 7/29 10 up up
4/53 5/54 10 up up
4/54 2/30 10 up up
5/53 12/54 10 up up
5/54 4/53 10 up up
6/53 11/30 10 up up
6/54 12/53 10 up up
7/29 3/30 10 up up
7/30 8/29 10 up up
8/29 7/30 10 up up
8/30 9/29 10 up up
9/29 8/30 10 up up
9/30 10/54 10 up up
10/53 11/29 10 up up
10/54 9/30 10 up up
11/29 10/53 10 up up
11/30 6/53 10 up up
12/53 6/54 10 up up
12/54 5/53 10 up up
DellEMC#
1550
Stacking