Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1501

Command Modes EXEC

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.

Example

DellEMC(conf)# show logging auditlog

Commands

● clear logging auditlog — clear the audit log.

show logging driverlog stack-unit

Display the driver log for the specified hardware component.

Syntax

show logging driverlog stack-unit stack-unit-number

Parameters

stack-unit

stack-

unit-number

Enter the keywords stack-unit followed by the stack member ID of the switch

for which you want to display the driver log.

defaults none

Command Modes

● EXEC

● EXEC Privilege