Administrator Guide

logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
● auth (authorization system)
● cron (Cron/at facility)
● deamon (system deamons)
● kern (kernel)
● local0 (local use)
● local1 (local use)
● local2 (local use)
● local3 (local use)
● local4 (local use)
● local5 (local use)
● local6 (local use)
● local7 (local use)
● lpr (line printer system)
● mail (mail system)
● news (USENET news)
● sys9 (system use)
● sys10 (system use)
● sys11 (system use)
● sys12 (system use)
● sys13 (system use)
● sys14 (system use)
● syslog (Syslog process)
● user (user process)
● uucp (Unix to Unix copy process)
The default is local7.
Defaults
local7
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Simple Network Management Protocol (SNMP) and Syslog 1499