Administrator Guide
Up Time : 5 day, 17 hr, 30 min
Dell EMC Networking OS Version : 9.13(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Burned In MAC : f8:b1:56:80:14:54
No Of MACs : 3
-- Module 1 --
Status : not present
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
1 1 up UNKNOWN up 0
1 2 absent absent 0
Unit TotalPower AvgPower AvgPowerStartTime
-------------------------------------------------------
1 34 32 12/12/2017-09:10
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 7058 up 7058
Speed in RPM
show tech-support
Display a collection of data from other show commands, necessary for Dell EMC Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. For details about filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A maximum of 20
characters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Updated to display the show revision and show os-version command
outputs.
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Control and Monitoring 145