Administrator Guide

-v 2 (OPTIONAL) Enter the keyword -v then the SSH version 2. The default is the
version from the protocol negotiation.
Defaults As shown in the Parameters section.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(1.0) Version 1 is deprecated.
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Added support for the following ciphers and HMAC alogorithms on the Z9000,
S6000, S4820T, S4820T. S6000–ON.
● aes128-cbc
● aes192-cbc
● aes256-cbc
● aes128-ctr
● aes192-ctr
● aes256-ctr
● hmac-sha2-256
● hmac-sha2-256-96
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Added support for the -c and -m parameters on the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Added IPv6 support. Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
Dell EMC Networking OS supports both inbound and outbound SSH sessions using IPv4 or IPv6
addressing. Inbound SSH supports accessing the system through the management interface as well as
through a physical Layer 3 interface.
Example
DellEMC#ssh 10.16.151.48 -l anvltest
Trying 10.16.151.48...
01:18:16: %STKUNIT0-M:CP %SEC-5-SSH_USAGE: Initiated SSH Client v2 (FIPS
1430 Security