Administrator Guide

ip ssh server dns enable
Enable or disable the DNS in SSH server configuration to resolve hostname for host-based authenticatioin.
Syntax
ip ssh server dns enable
To disable the DNS in SSH server configuration, use the no ip ssh server dns enable command.
Defaults
Disabled.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13.0.1 Introduced on the MXL, C9010, S3048–ON, S3100 series, S4810, S4820T, S4048–
ON, S4048T-ON, S5000, S6000, S6000–ON, S6100–ON, S6010–ON, Z9500,
Z9100–ON and FN-IOM.
Usage
Information
To disable the DNS in SSH server configuration, use the no ip ssh server dns enable command.
ip ssh server vrf
Configure an SSH server on either a specific VRF or a management VRF.
Syntax
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell EMC Networking representative.
ip ssh server vrf {any | management | vrf-name}
To disable the SSH server configuration, use the no ip ssh server vrf {management | vrf-
name} command.
Parameters
any Enter the keyword any to enable access to the server from any VRF.
vrf management Enter the keyword vrf followed by the keyword management to configure an
SSH server on a management VRF.
vrf vrf-name Enter the keyword vrf followed by the VRF name to configure an SSH server on
that VRF.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
1422 Security