Administrator Guide

Example —
System reboot
due to watchdog
timeout
DellEMC#show reset-reason
Cause: N/A.
Reset Time: N/A
Example —
System reboot
due to thermal
shutdown
The example shows the reason for the last reboot as N/A for thermal shutdown.
DellEMC# show reset-reason
Cause: N/A
Reload Time: N/A
Example —
System reboot
due to BIOS boot
fail
The example shows the reason for the last reboot as N/A for BIOS boot fail.
DellEMC#show reset-reason
Cause: NA
Reset Time: N/A.
Example —
Unknown reason
If the reason for the last system reboot is not available, the system displays the reason as N/A.
DellEMC# show reload-reason
Cause: N/A
Time: N/A
Example — Reset
reason of a single
stack unit
DellEMC# show reset-reason stack-unit 1
Cause : Reset by User through CLI command
Reset Time: 11/05/2017-08:36
Example — Reset
reason of all
stack units
DellEMC#show reset-reason stack-unit all
Last Reset Reason:
---------------------
Type Cause Time
-----------------------------------------------------------------------------------
stack-unit 1 Reboot by Software 11/05/2017-09:04
stack-unit 2 Reboot by Software 11/05/2017-09:04
stack-unit 3 Cold Reset N/A
stack-unit 4 N/A N/A
stack-unit 5 N/A N/A
stack-unit 6 N/A N/A
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the interface
information to display interface control block information for that interface:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
142 Control and Monitoring