Administrator Guide
Defaults Disabled.
Command Modes
● CONFIGURATION
Usage
Information
● All dynamic authorization commands are configured by entering this mode.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and
MXL.
radius-server attribute include-in-access-req
Initiates the RADIUS server with the Framed-IP-address or Framed-IPv6-address to be assigned to the host connected to the
switch.
Syntax
radius-server attribute attribute-number include-in-access-req
Parameters
attribute
attribute-number
Enter the attribute keyword and the number.
● 8- Enter the number to initiate the RADIUS server with the Framed-IP-address
to be assigned to the host.
● 168- Enter the number to initiate the RADIUS server with the Framed-IPv6-
address to be assigned to the host.
Defaults Disabled.
Command Modes
● CONFIGURATION
Usage
Information
● An OS9 switch or NAS sends the IP address of the connected host as attribute to the RADIUS server
through the RADIUS access requests.
● To remove the attribute configuration, enter the no form of the command.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.3P2) Introduced on the S3100 series.
Example
DellEMC(conf)# radius-server attribute 8 include-in-access-req
DellEMC(conf)# radius-server attribute 168 include-in-access-req
radius-server deadtime
Configure a time interval during which non-responsive RADIUS servers to authentication requests are skipped.
Syntax
radius-server deadtime seconds
1378 Security