Administrator Guide

After configuring the aaa authentication login command, configure the login
authentication command to enable the authentication scheme on terminal lines.
Connections to the SSH server work with the following login mechanisms: local, radius, and tacacs.
Related
Commands
● login authentication — enables AAA login authentication on the terminal lines.
● password — creates a password.
● radius-server host — specifies a RADIUS server host.
● tacacs-server host — specifies a TACACS+ server host.
access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-name Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Related
Commands
● line — applies an authentication method list to the designated terminal lines.
● ip access-list standard — names (or selects) a standard access list to filter based on the IP address.
● ip access-list extended — names (or selects) an extended access list based on the IP addresses or
protocols.
1356 Security