Administrator Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate
command.
Related
Commands
● default-information originate — generates a default route for RIP traffic.
redistribute isis
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1
routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1
and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2
routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as the metric value. The
range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a configured route
map.
Defaults Not configured.
Command Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
1304 Routing Information Protocol (RIP)