Administrator Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series only: Added trust IPv6 diffserv .
6.2.1.1 Introduced on the E-Series.
Example (IPv4)
DellEMC# show qos policy-map detail gigabitethernet 1/1
Interface GigabitEthernet 4/1
Policy-map-input policy
Trust dffserv
Queue# Class-map-name Qos-policy-name
0 - q0
1 CM1 q1
2 CM2 q2
3 CM3 q3
DellEMC#
Example (IPv6)
Example
(Summary IPv4)
DellEMC# show qos policy-map summary
Interface policy-map-input policy-map-output
Gi 4/1 PM1 -
Gi 4/2 PM2 PMOut
DellEMC#
show qos policy-map-input
View the input QoS policy map details.
Syntax
show qos policy-map-input [policy-map-name] [class class-map-name] [qos-
policy-input qos-policy-name]
Parameters
policy-map-name Enter the policy map name.
class class-map-
name
Enter the keyword class then the class map name.
qos-policy-input
qos-policy-name
Enter the keyword qos-policy-input then the QoS policy name.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Quality of Service (QoS) 1267