Administrator Guide

Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
Usage
Information
PIM leaf routers join the shortest path tree immediately after the first packet arrives from a new source.
show ipv6 pim bsr-router
View information on the bootstrap router.
Syntax
show ipv6 pim [vrf vrf-name] bsr-router
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF.
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.14(1.0) Introduced on the C9010, S3048ON, S3100 Series, S4048ON, S4048TON,
S6000ON, S6010ON, S6100ON, Z9100ON.
Example
DellEMC#show ipv6 pim bsr-router
PIMv2 Bootstrap information
BSR address: 200::1 (?)
BSR Priority: 0, Hash mask length: 126
Expires: 00:01:43
This system is a candidate BSR
Candidate BSR address: 100::1, priority: 0, hash mask length: 126
Next Cand_RP_advertisement in 00:00:25
RP: 100::1(Lo 0)
DellEMC#
show ipv6 pim interface
Display IPv6 PIM enabled interfaces.
Syntax
show ipv6 pim [vrf vrf-name] interface
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view IP
PIM debugging messages corresponding to that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
Command Modes
EXEC
EXEC Privilege
PIM-Sparse Mode (PIM-SM) 1191