Administrator Guide

register [
group
] (OPTIONAL) Enter the keyword register and optionally the group address to
invoke debugging of IPv6 PIM register messages for a particular group.
state (OPTIONAL) Enter the keyword state to view IPv6 PIM state changes.
timer [assert |
hello | joinprune |
register]
(OPTIONAL) Enter the keyword timer to view IPv6 PIM timers. Enter one of the
optional parameters:
assert: to view the assertion timer
hello: to view the IPv6 PIM neighbor keepalive timer
joinprune: to view the expiry timer (join/prune timer)
register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Command
History
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
ipv6 pim bsr-border
Define the border of IPv6 PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ipv6 pim bsr-border
To return to the default value, use the no ipv6 pim bsr-border command.
Defaults Disabled.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
9.14(1.0) Introduced on the C9010, S3048ON, S3100 Series, S4048ON, S4048TON,
S6000ON, S6010ON, S6100ON, Z9100ON.
Usage
Information
This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by
time-out.
ipv6 pim bsr-candidate
To join the Bootstrap election process, configure the PIM router as a bsr-candidate.
Syntax
ipv6 pim [vrf vrf-name] bsr-candidate interface [hash-mask-length]
[priority]
To return to the default value, use the no ipv6 pim bsr-candidate [vrf vrf-name] command.
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword vrf then the name of the VRF to configure the
PIM router on a VRF.
interface
Enter the following keywords and slot/port or number information:
For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
For a Port Channel interface, enter the keywords port-channel then a
number.
For a VLAN, enter the keyword vlan then a number from 1 to 4094.
1186 PIM-Sparse Mode (PIM-SM)