Administrator Guide
source-address
(OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to
display TIB information PIM-SM snooping discovered for a specified multicast
source.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show ip pim snooping tib commands shown in the following example.
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
uptime Displays the amount of time the entry has been in the PIM multicast route table.
expires Displays the amount of time until the entry expires and is removed from the
database.
RP Displays the IP address of the RP/source for this entry.
flags List the flags to define the entries:
● S = PIM Sparse Mode
● C = directly connected
● L = local to the multicast group
● P = route was pruned
● R = the forwarding entry is pointing toward the RP
● F = Dell EMC Networking OS is registering this entry for a multicast source
● T = packets were received via Shortest Tree Path
● J = first packet from the last hop router is received and the entry is ready to
switch to SPT
● K=acknowledge pending state
Incoming
interface
Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing
interface list:
Lists the interfaces that meet one of the following criteria:
● a directly connect member of the Group
● statically configured member of the Group
● received a (*,G) Join message
Example
DellEMC# show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
PIM-Sparse Mode (PIM-SM) 1179