Administrator Guide

static Enter the keyword static to specify that information from static routes is
redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The range is from 0
(zero) to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of the following:
● 1 = OSPF External type 1
● 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to
4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate
command.
Despite removing an OSPF process globally, the OSPF process is not completely removed from the BGP
configuration.
Related
Commands
● default-information originate — generate a default route into the OSPF routing domain.
1072 Open Shortest Path First (OSPFv2 and OSPFv3)