Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

891

892

893

894

895

896

897

898

899

900

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults None

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

8.3.12.0 Introduced on the S4810.

8.4.1.0 Introduced.

Usage Information Use this command to create an object that tracks the routing state of an IPv6 Layer 3 interface:

• The status of the IPv6 interface is UP only if the Layer 2 status of the interface is UP and the interface has a

valid IP address.

• The Layer 3 status of an IPv6 interface goes DOWN when its Layer 2 status goes down (for a Layer 3 VLAN,

all VLAN ports must be down) or the IP address is removed from the routing table.

Commands

• show track ipv6 route – display information about tracked IPv6 routes, including configuration, current state,

and clients which track the route.

• track interface ip routing – configure object tracking on the routing status of an IPv4 Layer 3 interface.

track ipv6 route metric threshold

Configure object tracking on the threshold of an IPv4 route metric.

Syntax

track object-id ipv6 route ipv6-address/prefix-len metric threshold

To return to the default setting, use the no track object-id command.

Parameters

object-id

Enter the ID number of the tracked object. The range is 1 to 500.

ipv6-address/

prefix-len

Enter an IPv6 address in X:X:X:X::X format. The valid IPv6 prefix lengths are from /0 to /

128.