Users Guide

Parameters
minutes Enter the number of minutes of inactivity on the system before disconnecting the current
session. The range is from 0 to 35791. The default is 10 minutes for the console line and
30 minutes for the VTY line.
seconds (OPTIONAL) Enter the number of seconds. The range is from 0 to 2147483. The default
is 0 seconds.
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information To remove the time interval, enter exec-timeout 0 0.
Example
Dell con0 is now available
Press RETURN to get started.
Dell>
exit
Return to the lower command mode.
Syntax
exit
Command Modes
• EXEC Privilege
• CONFIGURATION
• LINE, INTERFACE
• TRACE-LIST
• PROTOCOL GVRP
• SPANNING TREE
• MULTIPLE SPANNING TREE
• MAC ACCESS LIST
• ACCESS-LIST
• AS-PATH ACL
• COMMUNITY-LIST
• PREFIX-LIST
88 Control and Monitoring