Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

871

872

873

874

875

876

877

878

879

880

Commands

• show ipv6 nd ra-guard policy — display the configuration applied on all the RA guard policies or a specific RA

guard policy.

ipv6 nd ra-guard enable

Allow you to configure the RA guard related commands.

Syntax

ipv6 nd ra-guard enable

To disable the RA guard, use the no ipv6 nd ra-guard enable command.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.

ipv6 nd ra-guard policy

Define the RA guard policy name and enter the RA guard policy list configuration mode.

Syntax

ipv6 nd ra-guard policy policy-name

Parameters

policy

policy-name

Enter the keyword policy then the policy-name. The policy name allows a maximum of

140 characters.

Defaults None