Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

821

822

823

824

825

826

827

828

829

830

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series and E-Series.

Commands

• protocol lldp (Configuration) — enable LLDP globally.

• debug lldp interface — debug LLDP.

• show lldp neighbors — display the LLDP neighbors.

advertise med guest-voice-signaling

To advertise a separate limited voice service for a guest user when the guest voice control packets use a separate network policy than the

voice data, configure the system.

Syntax

advertise med guest-voice-signaling {vlan-id layer2_priority DSCP_value} |

{priority-tagged number}

To return to the default, use the no advertise med guest-voice-signaling {vlan-id

layer2_priority DSCP_value} | {priority-tagged number} command.

Parameters

vlan-id

Enter the VLAN ID. The range is from 1 to 4094.

layer2_priority

Enter the Layer 2 priority. The range is from 0 to 7.

DSCP_value

Enter the DSCP value. The range is from 0 to 63.

priority-tagged

number

Enter the keywords priority-tagged, the Layer 2 priority, and then the DSCP value.

Defaults Unconfigured.

Command Modes CONFIGURATION (conf-lldp)

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.