Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

811

812

813

814

815

816

817

818

819

820

Version Description

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series. Added the vlan-name option.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Commands

• protocol lldp (Configuration) — enable LLDP globally.

• debug lldp interface — debug LLDP.

• show lldp neighbors — display the LLDP neighbors.

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).

S3100 series

Syntax

advertise dot3-tlv {max-frame-size | power-via-mdi}

To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size | power-via-

mdi} command.

Parameters

max-frame-size Enter the keywords max-frame-size to advertise the dot3 maximum frame size TLV.

power-via-mdi Enter the keyword power—via-mdi to advertise IEEE 802.3 at power-via-mdi TLV.

Defaults None

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.