Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

731

732

733

734

735

736

737

738

739

740

Parameters

seconds

Enter the graceful restart time in seconds. The range is from 5 to 300 seconds. The

default is 30 seconds.

Defaults 30 seconds

Command Modes ROUTER ISIS

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.3.1.0 Introduced on the E-Series.

Commands

• graceful-restart t3 — configure the overall wait time before graceful restart completes.

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the interval before the system

sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is received from the helping router.

Syntax

graceful-restart t1 {interval seconds | retry-times value}

To return to the default, use the no graceful-restart t1 command.

Parameters

interval Enter the keyword interval to set the wait time. The range is from 5 to 120 seconds.

The default is 5 seconds.

retry-times Enter the keywords retry-times to set the number of times the request interval is

extended until a CSNP is received from the helping router. The range is from 1 to 10

attempts. The default is 1.

Defaults See Parameters.