Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

731

732

733

734

735

736

737

738

739

740

Version Description

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

7.5.1.0 Added IPv6 ISIS support.

6.3.1.0 Introduced.

Commands

• distribute-list out — suppress networks from being advertised in updates.

• redistribute — redistribute routes from one routing domain to another routing domain.

distribute-list out

Suppress network prefixes from being advertised in outbound updates.

Syntax

distribute-list prefix-list-name out [connected | bgp as number | ospf process-

id | rip | static]

To return to the default values, use the no distribute-list prefix-list-name out [bgp as

number connected | ospf process-id | rip | static] command.

Parameters

prefix-list-name

Specify the prefix list to filter prefixes in routing updates.

connected (OPTIONAL) Enter the keyword connected for directly connected routing process.

ospf

process-id

(OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is

from 1 to 65535.

bgp

as number

(OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.

rip (OPTIONAL) Enter the keyword rip for RIP routes.

static (OPTIONAL) Enter the keyword static for user-configured routing process.

Defaults Not configured.

Command Modes

• ROUTER ISIS (for IPv4)

• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.