Users Guide

show ipv6 fib stack-unit
View all FIB entries.
Syntax
show ipv6 fib [vrf vrf-name] stack-unit unit-number [summary | ipv6-address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors
corresponding to that VRF.
slot-number Enter the number of the stack unit.
summary (OPTIONAL) Enter the keyword summary to view a summary of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have more
specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage Information Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex displays as zero (0) on the
show ipv6 fib stack-unit output for neighbor entries, such as address resolution protocol (ARP) entries.
show ipv6 flowlabel-zero
Display the flow label zero setting.
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
IPv6 Basics 705